Instructions for the PC Software (see below for the PDA Software)

1. Click on "Download ShockClock 3.2.3" below. Select "Save" and pick a location in your computer to save to. The download will take about 8 - 10 minutes for typical high-speed Internet connections. Click "Close" when the download is complete.
2. Use WinZip or WinRar to Unzip the file to the folder
3. Double-click to enter this directory. Find the "setup.exe" file and double-click it.
4. If you have an earlier version of ShockClock installed in your computer you will be prompted to uninstall it.
5. After you have uninstalled the old version double-click "setup.exe" again to install the new ShockClock Software.
6. For assistance see Help Guides, "Help 2 Installing Software" or if you are really stuck email daqsupport@racetech.com .

NOTES:
>> Early versions of ShockClock Software are called ShockVIEW.
>> If you are using a USB/Serial Adapter Cable - When you start using the ShockClock Software be sure to setup the COM port in "Preferences".

Download the PC Software

For High-Speed Internet Connections such as T1, DSL, or Cable.

Download ShockClock 3.2.3 (40 MB) (when this link is clicked, it will take up to 30 sec to retrieve information-please wait)

CD's are available for users without a high-speed Internet connection. Contact Race Tech at 951.279.6655.

Instructions for the PDA Software

1. Click on "Download ShockClock_PDA 1.1" below. Select "Save" and pick a location in your computer to save to. The download will take about 1 - 2 minutes for typical high-speed Internet connections. Click "Close" when the download is complete.
2. Use WinZip or WinRar to Unzip the file (ShockClockPDA_Setup.zip) to the folder.
3. Establish an ActiveSync connection with your PDA.
4. On the PC, double-click to enter this directory. Find the "ShockClock_setup.exe" file and double-click it.
5. After it is done, it will prompt you to look at your PDA for further instructions. Follow these instructions.
6. To start the PDA software, select Start, Programs, and then ShockClock.
7. For assistance email daqsupport@racetech.com .

Requirements:

Approved PDA's

• HP iPAQ with a Serial Port
  h2200 Series
  h3800
  h3950
  h3970
  h4150
  h4350
  h5100 Series
  h5400 Series
  h5500 Series
  hx2100
  hx2400
  hx2700
  hx4700
  rz1710 (about $250)
  
• Note: The faster the processor the faster the data is displayed.

Other Requirements

• Windows Pocket PC 2003 or newer
• 8 MB available Memory
• HP iPAQ USB/Serial ActiveSync Cable FA122A (available from HP) or the standard cradle if it has a 9-pin Serial Port Connector
• MSDC 02PDA Download Cable & Software License (available from Race Tech - $74.99)
  

Download the PDA Software

For High-Speed Internet Connections such as T1, DSL, or Cable.

Download ShockClock PDA 1.1 (2.7 MB) (when this link is clicked, it will take up to 30 sec to retrieve information-please wait)

CD's are available for users without a high-speed Internet connection. Contact Race Tech at 951.279.6655.