These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type.  The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1.    Remove stock shock according to the procedures outlined in your Ducati Service Manual.

2.    Install G3-S Shock with the Body Eyelet bolting to the Swing Arm and the Rebound Adjuster facing the Fame as shown in the picture.

3.    If you purchased a Non Reservoir G3-S shock the procedure is the same, Body Eyelet to Swing Arm. Rebound Adjuster to Frame.

4.    Torque all fasteners to factory specifications.

Have Fun, Go Ride!!!

The shock is preset for you. Please check the sag before you ride.