G3-S Front Mounting Instructions
Can-Am Spyder

These are instructions for mounting the shock to the motorcycle. The shock has been preset for your weight, skill, and riding type.  The preset adjustments are listed on your Setup Sheet.

After mounting the shock please check the Sag. Click here for details.

Click here for General G3-S Instructions.

Note: Click on the images to enlarge.

1.    Remove the stock shock absorber according to the procedures in the Can-Am service manual.

2.    Mount G3-S Shocks as shown. The Shocks mount upside down with the Reservoir on the bottom.

3.    Once in place, push the upper shock bolt through the upper mount and torque to factory specifications. Repeat with lower shock mount bolt.

Have Fun!! Go Ride!!

The shock is preset for you. Please check the sag before you ride.